Reminders on display
Error code E2 appears on display panel of machine, indicating that the exhaust pipe temperature is too high, in order to protect compressor, the machine will stop working until the temperature of exhaust pipe is reduced to 110℃.
When the error code appears, the machine will stop working.
The control board detected that the temperature of the compressor exhaust pipe was too high. In order to protect the compressor, the control board stopped the machine's operation.
If the compressor exhaust temperature T ≥ 110°C is detected twice continuously within 5 seconds, the compressor will be stopped and the machine will stop working after 3 minutes.
The filter screen is dirty and blocked, resulting in insufficient air flow and insufficient heat dissipation of the condenser.
Other reasons.
With this video, you can quickly learn how to clean your filter in just one minute. If you feel like the video plays too fast to understand key details, you can go to the steps section for more detailed information.
1
2
3
4
5
PROCEDURE 1：Remove the front filter screen
After the dehumidifier has been running for a total of 250 hours, the filter cleaning indicator light will light up to remind you to clean the filter.
After the dehumidifier has been running for a total of 250 hours, the filter cleaning indicator light will light up to remind you to clean the filter.
Press power-on button to stop the machine from working.
Press power-on button to stop the machine from working.
Unplug the power plug and turn off the machine.
Unplug the power plug and turn off the machine.
Remove the front filter screen.
Remove the front filter screen.
Pull front filter screen out.
Pull front filter screen out.
PROCEDURE 2: Remove the front filter screen
Remove the back filter screen.
Remove the back filter screen.
Place your fingers on the handle of filter screen, push it upwards and then pull it outwards to loosen the buckle.
Place your fingers on the handle of filter screen, push it upwards and then pull it outwards to loosen the buckle.
Take the back filter screen away.
Take the back filter screen away.
Remove the back filter screen and expose the evaporator. Please do not touch the fins of the evaporator with your hands as they may be scratched.
Remove the back filter screen and expose the evaporator. Please do not touch the fins of the evaporator with your hands as they may be scratched.
PROCEDURE 3: Clean filter screens
Clean the front and back filter screens.
Clean the front and back filter screens.
Brush the front filter screen.
Brush the front filter screen.
Flush the front filter screen.
Flush the front filter screen.
Brush the back filter screen.
Brush the back filter screen.
Flush the back filter screen.
Flush the back filter screen.
Wipe the front and back filter screens dry.
Wipe the front and back filter screens dry.
PROCEDURE 4： Install front filter screen
Install the front filter back.
Install the front filter back.
Do not install the front filter upside down, with the notched side facing down.
Do not install the front filter upside down, with the notched side facing down.
Push the front filter into its final position.
Push the front filter into its final position.
PROCEDURE 5：Install back filter screen
Install back filter screen.
Install back filter screen.
Insert the buckle of back filter into the slot.
Insert the buckle of back filter into the slot.
The two upper buckles of back filter should be buckled into right place.
The two upper buckles of back filter should be buckled into right place.
Press the buckle.
Press the buckle.
The two lower buckles of back filter should be buckled into right place.
The two lower buckles of back filter should be buckled into right place.
Press once to make sure the two buckles are in right place.
Press once to make sure the two buckles are in right place.
If solution 1 cannot eliminate the error code, it is preliminarily determined that there is an abnormality in the refrigeration system. The reworking of the refrigeration system requires professional technical knowledge, otherwise it may cause safety issues to the user. Please call the service center to solve your problem.
© Copyright 2023 SHPlatform | All rights reserved
